TIP TIG Welding System

I. Configuration

Welding power source            1pc

Hot-wire power source            1pc

Water-cooling system             1pc

Vibration digital wire feeder      1pc

II. Main Parameter

Welding power source:

Welding current: 20-400A

Current type: DC/Pulse

Hot-wire power source:

Hot-wire current: 10-200A

Current type: DC/Pulse

Wire feeder:

Servo wire feeding motor, wire feeding speed: 0-10 m / min,

Mechanical vibration wire feeding, vibration frequency 0-50Hz

Touch screen operator panel:

10″ touch screen operation;

           Parameter setting, display, uploading;

Industrial computer operation panel:

           10″ industrial computer touch screen operation;

           Parameter setting, display, storage, upload.

III. Main Features and Performance

I) Functions of Vabrication wire-feeding

1. Stir the molten pool and make the crystal grains more fine, and the mechanical properties of the weld better;
2. Stirring to remove volatile gases and bubbles in the molten pool, improving the quality of welding;
3. The function of vibration improves the all-position welding ability;
4. The function of vibration makes the droplets easily escape from the welding wire into the molten pool.

II). Functions of automatic wire feeding function

1. Constant filling function with optimal direction and angle
2. The length of the welding wire entering the molten pool is always the same, and the welding quality is consistent.
3. Constant and sustainable wire feeding improves wire feeding efficiency and reduces the number of arcing stops.

III) Hot wire function:

1. reduce the welding current;
2. Improve the efficiency, the current automatic welding test welding speed reaches 720mm / min.

IV) Industrial computer control technology

1. The panel function is intuitive and easy to understand, and the operation is convenient, and the interface can be customized at will;
2. Data setting and reading all implement bus control mode, and digital communication is more accurate;
3. Welding process: full recording of parameter data such as welding current, welding voltage, wire feeding speed, vibration frequency and hot wire current;
4. Data upload via wireless and limited network; convenient access to MES system,company server or cloud.

            (Industrial computer interface )  

                                (Touch screen interface)