Mochini oa ho Welding oa Gmaw
NBE Series ea Inverter AC MIG Welding Machine
Ftse jang:
■ Taolo ea dijithale ea DSP e nang le likanale tse 30 tsa polokelo.
■ Ts'ireletso ea othomathike ho tsoa ho over-current, over/ under-voltage, overheating, le phase loss
■ Phanele e na le senotlolo sa ho notlela mosebetsi ho etsa bonnete ba ho lumellana ha li-parameter tsa welding.
■ Mofuta oa ho pholile ha metsi le moea o pholileng ka boikhethelo
■ E na le mesebetsi eohle ea mochini oa welding oa NBM, hammoho le AC pulse/AC dual pulse
■Ha double pulse welding, sebopeho se setle, sekala sa tlhapi se hlakile, phetolo e matla le e fokolang ea pulse e hloekile, 'me arc e utloahala ka ho hlaka.
■Mocheso o tlase ho feta NBM
■ E na le likhokahano tsa liroboto.
Li-parameter tsa mohloli oa matla
| Mohlala Litaba | NBE-350 | NBE-500 | NBE-630 |
| Mohloli oa matla a kenyang | 3-mohato 380V 50/60Hz | ||
| E lekanyelitsoe curr ea ho kenya. | 20.7A | 35A | 52A |
| E lekantsoe matla a ho kenya | 13.6KVA | 23KVA | 34.2KVA |
| E lekantsoe welding curr./Volt. | 350A/31.5V | 500A/39V | 630A/44V |
| Rated duty cycle | 100% | 100% | 100% |
| Matla a motlakase a se nang boima (MAX) | 63V | 77V | 82V |
| Fetola mefuta e mengata ea li-welding curr. | 40-350A | 40-500A | 50-630A |
| Katleho | 85% | 85% | 85% |
| Ntlha ea matla | >0.95 | >0.95 | >0.95 |
| terata e loketseng | Φ1.0-Φ1.6mm Al, AlSi, AlMg terata | ||
| Mohlala oa terata | CS-501B | ||
| Boima ba terata | 16Kg | ||
| Bolelele ba thapo ya totjhe | 3m | ||
| Mokhoa oa ho pholisa oa toche | Pholiso ea metsi | ||
| EMC | mofuta | ||
| Phetoho ea moea | 40A | 63A | 63A |
| Sehlopha sa insulation | F | ||
| Sehlopha sa tšireletso | IP23S | ||
Paramethara ea terata feeder
| Matla a lekantsoeng | 34V |
| E lekantsoe hajoale | 3A |
| Lebelo la ho fepa | 1.5-25m/min |
| Bophahamo ba phetoho ea reel | 50 limilimithara |
| Bophara ba reel | 103 limilimithara |
| Boima ba mohala | 25Kg |
| Boima ba 'mele | 16Kg |
| Boemo | 640×250×400 |
| Wire bophara | 0.8-1.5 limilimithara |
| Mohala | E tiileng, e boreleli, e bonolo |
Lipotso le Likarabo
1. Lipotso: Na u feme kapa k'hamphani ea khoebo?
KARABO: Re moetsi oa mochini oa welding ea nang le nalane ea lilemo tse fetang 30. Re na le semela le mobu oa rona mme lihlahisoa tsohle li hlahisoa ka thata ka ISO9001: 2013, le lisebelisoa, kahoo re ka fihlela litlhoko tsa hau tsa bongata le boleng.
2. Lipotso: ho joang ka MOQ ea hau:
KARABO: Ka kakaretso ha u khetha lihlahisoa tse fapaneng, odara ea rona e tlase ke qty. hape e tla fapana.
3. LipotsoPayment e bolela:
KARABO: Ha e le hantle, tefo e ka khethoa: Ka tloaelo re khetha ho T/T le LC
4. Lipotso: Nka fumana lihlahisoa neng?
KARABO: Lihlahisoa tsa hau li tla fihla boema-kepe bo haufi ba lehae kamora hore odara e netefatsoe, ke matsatsi a ka bang 30.