Mochini oa ho Welding oa Gmaw

Cold arc welding, eo hape e tsejoang e le cold metal transition welding, hajoale e kenyelletsa haholo STT (surface tension transfer), CMT (ho tlosoa ha mohala ka nako), le Cold Arc (thitdown e nakong ka nako ea arc short circuit) ho fihlela arc e batang.

Sichuan Morrow Welding Development Co., Ltd. e thehile mechini ea ho tjheseletsa arc transition e batang joalo ka DSP-500TG5 ts'ebetso e batang ea arc lilemong tse 10 tse fetileng. Ka 2023, re ile ra theha terata ea welding ka nako e loketseng ho fihlela mochini o chesang oa phetoho ea tšepe. Moetso oa rona oa mochini oa tjheseletsa ke MCT-350, o tsamaellanang le liroboto bakeng sa tjheseletso ea boleng bo holimo e batang ea arc.

Lintlha tse ka sehloohong:

① Mochini oa welding o amohela theknoloji ea inverter ea IGBT le taolo e nepahetseng ea dijithale ea DSP.

② E na le ts'ireletso e feteletseng, ea undervoltage, overheating, le ts'ireletso ea karolo ea tahlehelo.

③ Khafetsa ea ho hula mohala: 80-120Hz.

④ Nakong ea welding, mocheso oa mocheso ho seam oa weld o tlase.

⑤ Ha ho na welding ea spatter, 'me arc e tsitsitse haholo.

⑥ Welding ea boleng bo holimo ea lipoleiti tse tšesaane tse loketseng phetoho e khutšoane ea arc

Welding le borokho.

⑦ A ka cheselletsa tšepe ea carbon, tšepe e sa hloekang, aluminium le lisebelisoa tsa eona, koporo

Mefuta e fapaneng ea litšepe tse kang galvanized sheet.

 Lintlha tse ka sehloohong:

■ Pontšo ea dijithale le ho seta esale pele ha hona joale le motlakase, mefuta e mengata ea phetoho ea motlakase

■ mosebetsi o khethehileng oa ka tsela e iketsang tlosa melting-bolo ho tloha qetellong ea tjheseletsa terata

■ Amohela sistimi e koetsoeng habeli ho laola arc, arc e chesa ka mokhoa o tsitsitseng

■ Ho bonolo ho otla arc, spatter e nyane

■ Phapang e pharaletseng ea phetoho ea motlakase oa ho kenya: 280V-450V

■ Thapo ea ho tjheseletsa e ka lelefatswa ho fihla ho 60m

■ Taolo ea dijithale tsohle, ts'ebetso e ts'epahala ebile e tsitsitse

■ Ke thaepa mochine o tšehetsa phetoho ea synergic le ho seta esale pele ha hona joale le motlakase

■ Ha phoso e etsahala, khoutu e itlhahisa ka bo eona sesosa sa ho se sebetse hantle

Ho amohela mojule oa IGBT o tsoetseng pele ka ho fetesisa, sesebelisoa se seholo sa IC, le loop ea inverter ea borokho bohle, welder ea rona ea IGBT e nyane ka boholo, e bobebe ka boima, e sebetsa hantle haholo, 'me tšebeliso e tlase e se nang mojaro, ho feta 1/3 ea ho boloka matla. papisong le motho ea chesehelang ka tloaelo. Ke thepa e loketseng ea ho boloka matla a ho boloka matla. Ka likarolo tse kang lebelo le phahameng la ho arabela, ts'ebetso e phahameng, seam se setle, bokhoni bo matla ba ho kenya matla, spatter e nyenyane, lerata le tlaase, le bonolo ho sebetsa le ho sisinyeha, ke thepa e loketseng. E ka ts'ehetsa mesebetsi e kang ts'ireletso ho tsoa ho mocheso o feteletseng, overcurrent, le over/under-voltage protection, preset ea hona joale le voltage.

1.Loop e ka sehloohong e amohelang sebopeho sa borokho bohle (mohaho o ka ts'ehetsa hantle-ba khahlanong le ho se leka-lekane hantle), ts'ireletso ea overcurrent le ts'ireletso ea mantlha ea overcurrent bakeng sa transformer, mochini oa welding o filoe ts'epo e phahameng;

2. Ho amohela diode e bonolo ea ho hlaphoheloa e le karolo ea ho lokisa, ho bonolo ho hlaphoheloa, mocheso o tlase;

3. Moralo o motle oa ts'ebetso, o bonolo ho otla arc, arc e chesa ka mokhoa o tsitsitseng le ho kenella ka botebo;

4. Bokhoni bo matla ba ho intša matšeliso, mefuta e mengata ea 270V-450V

5.Mochine oa rona oa ho iketsetsa le ho hlahisa DSP letoto la IGBT inverter welding mochine ke mochine oa welding oa digital o ka sebelisoang bakeng sa DC CO2, DC MAG, pulse MAG welding ea carbon steel, stainless steel, aluminium le lisebelisoa tse ling. Mofuta ona oa mohlala o ka tšehetsa welding ea lithapo tse fapaneng ho tloha Φ 0.8- Φ 1.6mms. Mochini ona o na le likarolo tsa litsebi tsa welding. Basebedisi ba hloka feela ho khetha thepa ea ho tjheseletsa le bophara ba terata, ho fetola lebelo la ho fepa terata ka mochine oa ho fepa ka terata, le ho beha motlakase oa welding kapa bolelele ba arc ho etsa welding e tloaelehileng. Tšireletso e ikemetseng ho tloha tahlehelong ea karolo, ho chesa haholo, ho feta, le ho se sebetse hantle, mochine ke sesebelisoa se loketseng sa ho tjheseletsa se nang le ts'ebetso e phahameng le ho boloka matla.

Likarolo tse ka Sehloohong

■ Kenyelletso: 270V～450

■ Tšireletso e ikemetseng ho tloha ho overcurrent, over/undervoltage, overtemprature, phase-khaello

■ Pontšo ea digital ea hona joale le motlakase

■ Ho bonolo ho otla arc le arc e chesa ka mokhoa o tsitsitseng

■ Lerata le lenyenyane, le khanyang le le tlaase

■ Tšehetsa ho feto-fetoha ha motlakase ka ± 20%

■ Terekere ea ho tjheseletsa e sebetsa ka bongata, lebelo la ho hwanta le ka feto-fetoha, khetho e fapaneng ka lehlakoreng la ho swinging, lebelo la ho swinging le lebelo la ho swing, le setsi sa swing se ka hlophisoa esale pele.

Tlhophiso

Tlhophiso ea mochini oa arc o sirelelitsoeng ka khase o ikemetseng o tjena

Tekheniki Parameter

1. Mohloli oa matla

2.Trekere ea Welding

Maemo a Phethahatso

• Maemo a Tšireletso: GB15579-95
• Tekanyetso ea tekheniki: JBIT8748－98
• Tekanyetso ea ho cheselletsa: APT1104
• Sehlopha sa Insulation: Sehlopha sa F

Litokomane

• Lenane la ho paka
• Setifikeiti sa Litšoaneleho
• Buka ea Tataiso
• WarrantyCard

Likaroloana:

• Mesebetsi e laoloa ke chip ea DSP mme e ka boloka li-parameter tse 30
• Automatic switch off on over-current, over/ under-voltage, over-heat, phase e haellang
• Ts'ehetsa khetho ea pele ka pele ho phanele e ka pele
• Tšehetsa MMA, MIG/MAG le Hi-speed MIG/MAG welding
• Welding e tsitsitseng ea pulse e ka bonoa ka terata ea 50A ea hona joale le Φ1.2mm
• E loketse haholo bakeng sa tjheseletsa ea pulse ea bohareng / e teteaneng ka terata ea Φ6mm
• E ka sebelisoa le roboto ho hlokomela welding ea othomathike

1. E na le mesebetsi e kang phetoho ea mantlha ea hona joale / ea motlakase, phetoho ea 4T ea hona joale / ea motlakase, ea bohlokoa / e tima.

khetho, ho boloka le ho bala paramethara ea welding, sete ea welding ea letheba

2. Ka sebopeho sa roboto le sebopeho sa taolo ea sehlopha
3. Ea pele Chaena: Hi-speed DC welding

        Melemo:

A．Ka tjheseletsa e ka tlase, bokamorao ba seam welding le eona e ntle, mefokolo e ka qojoa.

B.Ho kenella e ka bang 20% ​​e kholoanyaneho feta tjheseletsa ea DC MIG/MAG ka har'a welding e kholo ea hajoale (300A)

C.Lebelo la tjheseletsa le phahame ka 15%.ho feta tjheseletso e akaretsang ya MIG/MAG

D．Ka tjheseletsa ea fillet, nama ea ho cheselletsa e bataletse ebile e boreleli, ha e na leqhubu

• Metsi a tšepe a phalla hantle 'me a bonolo ho laola ho koahela tjheseletsa

4. E loketse terata e rekisoang/e nang le flux-cored

Papiso ea DC MIG/MAG welding le Hi-speed DC MIG/MAG welding

Papiso ea Hi-speed DC pulse weldingle tjheseletso ya lerothodi le le leng

Mekhahlelo

Ftse jang:

■ Taolo ea dijithale ea DSP e nang le likanale tse 30 tsa polokelo.

■ Ts'ireletso ea othomathike ho tsoa ho over-current, over/ under-voltage, overheating, le phase loss

■ Phanele e na le senotlolo sa ho notlela mosebetsi ho etsa bonnete ba ho lumellana ha li-parameter tsa welding.

■ Mofuta oa ho pholile ha metsi le moea o pholileng ka boikhethelo

■ E na le mesebetsi eohle ea mochini oa welding oa NBM, hammoho le AC pulse/AC dual pulse

■Ha double pulse welding, sebopeho se setle, sekala sa tlhapi se hlakile, phetolo e matla le e fokolang ea pulse e hloekile, 'me arc e utloahala ka ho hlaka.

■Mocheso o tlase ho feta NBM

■ E na le likhokahano tsa liroboto.

Li-parameter tsa mohloli oa matla

Paramethara ea terata feeder

Lipotso le Likarabo

1. Lipotso: Na u feme kapa k'hamphani ea khoebo?
KARABO: Re moetsi oa mochini oa welding ea nang le nalane ea lilemo tse fetang 30. Re na le semela le mobu oa rona mme lihlahisoa tsohle li hlahisoa ka thata ka ISO9001: 2013, le lisebelisoa, kahoo re ka fihlela litlhoko tsa hau tsa bongata le boleng.

2. Lipotso: ho joang ka MOQ ea hau:
KARABO: Ka kakaretso ha u khetha lihlahisoa tse fapaneng, odara ea rona e tlase ke qty. hape e tla fapana.

3. LipotsoPayment e bolela:
KARABO: Ha e le hantle, tefo e ka khethoa: Ka tloaelo re khetha ho T/T le LC

4. Lipotso: Nka fumana lihlahisoa neng?
KARABO: Lihlahisoa tsa hau li tla fihla boema-kepe bo haufi ba lehae kamora hore odara e netefatsoe, ke matsatsi a ka bang 30.

Sebopeho

■ Theknoloji ea Soft switch, DSP taolo eohle ea dijithale

■ Ka database ea litsebi, e ka boloka 30sets of parameters

■ Tšireletso e ikemetseng ho tloha ho over-current, overheat, over/ under-voltage

■ Arc e chesa ka mokhoa o tsitsitseng, matla a matla a ho kenella, letamo le leholo le qhibilihisitsoeng

■ Tšehetsa cellulose/low-hydro electrode welding GTAW, TIG welding, flux-cored wire self-protection welding, GMAW

Likaroloana:

■DSP taolo ea dijithale kaofela, e nang le likanale tse 30 tsa ho boloka

■ Ts'ireletso ea othomathike ho tsoa ho over-current, over/ under-voltage, over-heat, phase e haellang

■ Ka senotlolo sa senotlolo sa tšebetso ho phanele e ka pele, se ka tiisa ho ts'oana ha li-parameter tsa welding

■ Tšehetsa hi-speed pulse welding, hi-speed double-pulse welding, welding e nyolohetseng holimo, welding ea metso le welding ea cold-arc

■Na o ka cheselletsa tšepe e sa hloekang, tšepe e matla haholo, tšepe e phahameng ea alloy, tšepe e tlase ea alloy, tšepe ea khabone, li-nickel tse fapaneng (tšepe, cobalt) tse thehiloeng hantle.

■ Ka segokanyimmediamentsi sa sebolokigolo le sehokelo sa taolo ya sehlopha

■DSP taolo ea dijithale kaofela, e nang le likanale tse 30 tsa ho boloka

■ Ts'ireletso ea othomathike ho tsoa ho over-current, over/ under-voltage, over-heat, phase e haellang

■Ka senotlolo sa ho ea pele ka lebelo phanele e ka pele

■ Tšehetsa MMA, MIG/MAG le Hi-speed MIG/MAG welding

■ tjheseletsa e tsitsitseng ea pulse e ka bonoa ka terata ea 50A ea hajoale le Φ1.2mm

■ E loketse haholo bakeng sa tjheseletsa ea pulse plate e bohareng / e tenya ka terata ea Φ1.6mm