A na-emepụta traktọ ahụ site n'inweta uru nke traktọ SAW na-eji ma n'ụlọ ma na mba ọzọ. Ọ na-egosipụta ụdị ọhụrụ, ịdị arọ dị arọ, ọrụ a pụrụ ịdabere na ya na enyi na enyi mgbe mgbanwe na nkwalite anyị na-aga n'ihu na afọ ndị na-adịbeghị anya.

Njirimara:

• Traktọ ahụnjemnwayọọ nwayọọma nwee oke ịgbado ọkụ ka ukwuu maka waya sitere na dayameta 2.0 ruo Φ6.0.
• Iwu dị mfe na mgbanwe. Ejikọtara elu na ala, ntụgharị nke isi traktọ na ogwe ọkụ.
• Ntugharị obe nwere ike ịgbanwe agbanwe na ịdị elu
• Akpa ntugharị dị mfe mgbanwe.
• Nri waya na-agba ugboro abụọ nwere usoro ịgbatị, nri waya kwụsiri ike, ezigbo etiti, ike ịbịaru siri ike na ike mgbasa dị ala.

atụmatụ:

∎ Mbupu gas ga-ebuga nwere ike kpuchido nozzles na electrodes nke ọma

■ Mkpọda elu ugbu a, nwere ike ibelata oriri nke nozzles na electrode ma belata spatter

∎ Ịcha oge na oge nwere ike ịhazi ya

∎ Kwado 2T/4T, dị mfe iji rụọ ọrụ, yana interface robot na interface manipulator

■ Site na mgbama mmalite arc, ọ dị mfe iji robot na onye na-emegharị ihe

∎ Biputere gas na-eziga oge mgbanwe, nke nwere ike ichebe nozzles na electrodes nke ọma

∎ HF obere mgbanye mgbanye ọkụ dị ugbu a, ọnụego ọganiihu dị elu, obere nozzle na oriri electrode.

∎ Enwere ike ịchekwa paramita na-akpaghị aka mgbe igwe na-agbanyụ

∎ Enwere ike nweta ịgbado ọkụ kwụsiri ike karịa njikarịcha nkewa, nnabata, mkpuchi na ikpughe akara ndabichi HF.

■ Nwere ike ịkpụ nchara dị nro, igwe anaghị agba nchara, alloy steel, aluminum na alloy ya, wdg.

■ Nleba anya na-aga n'ihu na-eme nke ọma, na-ekwe nkwa ịrụ ọrụ akụrụngwa nke ọma

∎ Site na ọrụ nlele akpaaka nke ndabara maka obere sekit (koodu njehie E00), ịlele oke ọkụ (koodu njehie E02)

∎ Nyochaa akpaaka nke ndabara ike ntinye (koodu njehie E01), nlele ikuku ikuku, nchebe akpaaka na-enweghị gas (koodu njehie E03), nyocha ụgbọ mmiri mmiri (koodu njehie E04)

Atụmatụ:

■DSP njikwa dijitalụ, nwere ọwa nchekwa 30

∎ Ngosipụta LCD menu na ọrụ, yana ụdị izugbe yana ụdị ọgụgụ isi

■Thazigharị oge ịgbado ọkụ ugbu a na oge ịgbado ọkụ, nchekwa data ọkachamara nwere ike iji maka ịgbado ọkụ nwere ọgụgụ isi.

■Arc-mmalite usoro mmemme akpaaka, arc na-amalite nke ọma, weld na-egbuke egbuke ma maa mma

■ Oge ịgbado ọkụ dị mkpụmkpụ, ike gbadoro anya

∎ Ọwa nke nwere unit jụrụ oyi n'ime, si otú a nwere ike ibelata oriri ọkụ ma gbatịa ndụ ọrụ ọkụ

∎ Ọwa na-ekpo ọkụ n'èzí, obere spatter ole na ole

■ Igwe ịgbado ọkụ stud ogologo oge dabara adaba maka nhazi ígwè, ebe ụgbọ mmiri, àkwà mmiri, ọkụ ọkụ, na ihe ndị ọzọ; igwe ịgbado ọkụ stud dị mkpụmkpụ dabara adaba maka chassis, igwe mpempe akwụkwọ, arịa ụlọ, nrụpụta igwe, igwe ọkụ, wdg.

■ The ogologo okirikiri stud ịgbado ọkụ igwe RSN-1600/2000/2500/3150 nwekwara ike weld stud na bolt ofФ3-12mm dị ka obere okirikiri stud ịgbado ọkụ.

Atụmatụ:

∎ Nchedo akpaaka site na oke-ugbu a, oke ọkụ, karịa/n'okpuru voltaji

■ Arc na-ere ọkụ nke ọma, ọdọ mmiri a wụrụ awụ dị mma, ezigbo eriri ịgbado ọkụ

■ Kwesịrị ekwesị maka ọtụtụ ụdị electrode (cellulose electrode, obere-hydro electrode na electrode nkịtị)

■ Obere na ìhè

■ Kwesịrị ekwesị maka ịgbado ọkụ nke tube na cellulose electrodes dị ka E6010, E8010, E7048

■ Kwesịrị ekwesị maka ọkpọkọ ịgbado ọkụ

Atụmatụ:

∎ Malite arc na HF Pulse, were njikwa dijitalụ DSP, yana ọwa nchekwa 30

∎ Nchedo akpaaka site na oke ọkụ, oke ọkụ, karịa/n'okpuru voltaji

■ Nkwado DC TIG ịgbado ọkụ, pulse TIG ịgbado ọkụ na MMA ịgbado ọkụ, nwere ike welded dị otú ahụ ọla dị ka igwe anaghị agba nchara, alloy ígwè, ọla kọpa, ọlaọcha, titanium, wdg

∎ LCD na-egosi menu na arụrụ ọrụ, yana igodo mbugharị ngwa ngwa n'ihu panel

■ Pre digital set of welding current, current up/down slope

■ Arc na-ere ọkụ nke ọma ọbụlagodi mmepụta kacha dị ala bụ 10A, ọbụlagodi 5A

Atụmatụ:

■ Teknụzụ inverter nke dị nro, njikwa DSP dijitalụ niile, ọkwa dị elu n'ụwa

∎ Site na nchekwa data ndị ọkachamara ịgbado ọkụ dị n'ime, nwere ike ichekwa 30 n'ime oke setịpụrụ onwe

∎ Nchedo akpaaka site na oke-ugbu a, n'elu/n'okpuru voltaji, oke okpomọkụ

n menu LCD dijitalụ niile iji gosi ọrụ na data niile, dị mfe iji rụọ ọrụ

■ Nwere ike nweta ezigbo ebili mmiri AC/DC n'agbanyeghị ihe dị ugbu a pere mpe ma ọ bụ buru ibu

∎ Oke nhicha na obosara ihicha na-aga n'ihu na-agbanwe agbanwe, oke ngbanwe dị obosara

■ Kwado ịgbado ọkụ TIG ntụpọ, ịgbado ọkụ DC MMA, DC TIG ịgbado ọkụ, DC usu TIG ịgbado ọkụ, square-efegharị efegharị TIG ịgbado ọkụ

■ Nkwado mmezi nke mbido mbụ, elu-mkpọda nke ugbu a, mkpọda nke ugbu a, onye nchịkọta ugbu a, iji ghọta ịgbado ọkụ dị elu.

■ Ojiji zuru oke, na-akwado ịgbado ọkụ dị elu nke ụdị ọla na alloys niile